Our industrial size vacuum cups are 4-1/2” in diameter and can hold up to 120 lbs. each. Each one has a metal d-ring that gives our webbing straps a connection point. They are used on hard top boats that do not have frame work for our webbing straps to connect to.
Extending from 40” to 58” the telescoping center support pole goes into a rocket launcher on the bridge of the boat. It allows you to have a higher point of attachment to secure the center tab(s) on your HARBOR SHADE.
T-Top Telescoping Poles:We manufacture our own heavy duty anodized aluminum telescoping poles. We use the same piping that the T-Top frames are made of. The telescope poles adjust from 42 in. to 72 in. and mount into standard rod holders. (2 Poles Included with Kit)
Velcro Clean Up Tabs:Included with your kit is a set of 9 - 6” long double sided Velcro strips. These are used after you have installed your Boat Shade kit and the ends of the webbing straps are left hanging. Simply roll the excess webbing strap up and wrap a Velcro strip around it and secure it to webbing connector strap. They can be used for any loose ends.
Carry Bag:Your UBSK will be contained quite nicely in the storage provided. It has an over the shoulder strap which makes it easy to carry if you don’t store the shade kit on the boat. It zippers the whole length of the bag making it easy to install or remove the shade kit. The polyester material is lightweight and breathable. The dimension of the bag is 48" x 12" and easily stow away in the boat.
The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is five (5)
The suggested amount of Sea Sucker Suction Cups for your Harbor Shade is seven (7)
Velcro Clean Up Tabs:Included with your kit is a set of 9 - 6” long double sided Velcro